Twinflex TOZEN
กรุณาติดต่อเจ้าหน้าที่
- หมวดหมู่ : ฟิตติ้ง (สแตนเลส, เหล็ก) สายอ่อน แสตนเลส, เหล็ก และ ท่อยาง TOZEN
- ยี่ห้อสินค้า : TOZEN
รายละเอียดสินค้า
No. | Parts | Material |
1 | Flange | FCD450, SS400 |
2 | Reinforcing Ring | Carbon Steel (SWRH) |
3 | Inner Rubber | Synthetic Rubber |
4 | Outer Rubber | Synthetic Rubber |
5 | Reinforcing Cord | Synthetic Fiber |
- Standard item employs JIS10K flange. May be replaced with ANSI, BS, DIN and other standard (drilling).
- Standard rubber is Neoprene. EPDM and other rubbers are available upon request.
Nominal Dia. | Dimension (mm) | Mass | Allowable Movement (mm) | Installation Tolerances (mm) | ||||||||
mm | Inch | L | d | Kgs | T.M. | A.E. | A.C. | A.M. | T.M. | A.E. | A.C. | A.M. |
32* | 1 1/4 | 175 | 32 | 1.8 | 20 | 10 | 20 | 20 | 8 | 3 | 6 | 7.5 |
32 | 1 1/4 | 175 | 35 | 2.2 | 20 | 10 | 20 | 20 | 8 | 3 | 6 | 7.5 |
40 | 1 1/2 | 175 | 35 | 2.3 | 20 | 10 | 20 | 20 | 8 | 3 | 6 | 7.5 |
50 | 2 | 175 | 45 | 3.0 | 20 | 10 | 20 | 20 | 8 | 3 | 6 | 7.5 |
65 | 2 1/2 | 175 | 60 | 3.9 | 20 | 10 | 20 | 20 | 8 | 3 | 6 | 7.5 |
80 | 3 | 175 | 70 | 4.1 | 20 | 10 | 20 | 20 | 8 | 3 | 6 | 7.5 |
100 | 4 | 225 | 95 | 5.3 | 25 | 15 | 30 | 20 | 10 | 3 | 6 | 7.5 |
125 | 5 | 225 | 120 | 7.6 | 25 | 15 | 30 | 20 | 10 | 3 | 6 | 7.5 |
150 | 6 | 225 | 145 | 11 | 25 | 15 | 30 | 20 | 10 | 3 | 6 | 7.5 |
200 | 8 | 325 | 195 | 17 | 30 | 20 | 40 | 20 | 12 | 3 | 6 | 7.5 |
250 | 10 | 325 | 245 | 24 | 30 | 20 | 40 | 20 | 12 | 3 | 6 | 7.5 |
300 | 12 | 325 | 290 | 28 | 30 | 20 | 40 | 20 | 12 | 3 | 6 | 7.5 |
350 | 14 | 250 | 340 | 35 | 15 | 15 | 20 | 15 | 6 | 3 | 6 | 7.5 |
400 | 16 | 250 | 390 | 66 | 15 | 15 | 20 | 15 | 6 | 3 | 6 | 7.5 |
450 | 18 | 275 | 440 | 67 | 15 | 15 | 20 | 15 | 6 | 3 | 6 | 7.5 |
500 | 20 | 275 | 490 | 83 | 15 | 15 | 20 | 15 | 6 | 3 | 6 | 7.5 |
600 | 24 | 300 | 590 | 123 | 15 | 15 | 20 | 15 | 6 | 3 | 6 | 7.5 |
* Assembly with ANSI 150P
T.M. = Transverse Movement
A.E. = Axial Elongation
A.C. = Axial Compression
A.M. = Angular Movement
- Use the products within the given allowable movements.
- Tolerances for installation are included in the allowable movements (Allowable movements = Tolerances for installation + Operating movements)
- Although allowable movements are given, no allowance for elongation is recommended when installing the joint.
"หากท่านลูกค้าต้องการสินค้านอกเหนือจากในรายการ สามารถสั่งซื้อได้โดยตรงที่"
เบอร์: 02-9187343
Email: T.P.online01@gmail.com
Line: @TPinter
"รายละเอียดสินค้าอาจมีการเปลี่ยนแปลงโดยไม่แจ้งให้ทราบล่วงหน้า"